Brick Setting Machine with Different Kilns and Capacity

Shuangyashan Oriental Wall Material Group Co., Ltd was established in 1968 and engaged in supplying whole set of fired brick making machine from raw material preparation, extruder, cutter, brick setting machine, to kiln cars running system.

After more than 40 years development and innovation, now it can serve customers with full service and is capable of ensuring the success of customers. Raw material of bricks can be clay, gangue, fly ash and shale.

ZMP brick setting machine is suitable for once -firing and the second -firing . After grouping the brick ( the wet brick , finished brick ) square,it can dish them automatically and place them on the designated location of kiln car. Laying is flexible which can in turn setting and lying setting etc. Below is the work process of ZMP brick setting machine.

1. The strips extruded from the brick machine are cut into separated brick strips by strip cutter;
2. The strips are pushed through cutting wire of the brick cutter to the transitional bed and the strips are cut into adobe bricks;
3. When the transitional bed is fully occupied, the bricks are pushed to the brick board;
4. The lift cylinder controls the chunk clamps down to reach the bricks, then lifts the clamped bricks to a certain height;
5. Chunk puts down the bricks on the tunnel kiln car for next brick drying or firing in kiln system.

We have different types setting machine with different kinds kilns and different capacity. Also it suitable for any specifications kilns in accordance customer’s requirement. Welcome to enquiry!

Homepage/ http://www.sysdf-brickmachine.com
E-mail/ sysdf@sysdf.com